clear

Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

phone04-586 6681
assignment_indRegister
shopping_cart
Untitled
Untitled
Untitled
Untitled

BROWSEchevron_rightWOOD COATINGchevron_right2K Clears

new
bookmark
Reduced Clears | 4 Litre 4 Litres 0686A/4L

We pride ourselves on giving the best quality, brands and service. So if for any reason you're not happy with your purchase; contact us and we will do our best to rectify the problem.

Reduced Clears | 4 Litre

PPG
0686A/4L
5+
$89.56
favorite_borderAdd to Favorites
Add To Cartexpand_lessexpand_more

A two pack polyurethane, based on acrylic resin.

- Very Fast drying
- Excellent wet and dry heat resistance
- Very good mar resistance
- Excellent chemical/solvent resistance
- Excellent abrasion resistance
- Available in 10% and 30% gloss levels.

Uses:
0686 is a high quality finish for furniture, toys, shop fittings, doors, cabinets, desks, panelling, partitions and most interior woodwork. Ideal for use in bathroom and kitchen areas. NOT for external use.

Surface Preparation:
Can be applied over suitably sealed Wood MDF

Thinning and cleaning up:
Once catalysed, thin as follows:
- Normal/warm conditions: Add 25-50% 140
- Warm/Humid Conditions: Add 25-50% of a 9:1 blend of 140 Reducer: 539R Acrylic Retarder.

Amount of thinning varies, depending on colour and gloss level. Clean gun and equipment with 140 Reducer or 684 Reducer.

Application:
Spray - conventional. 
This product should be layered up at approximately 50 microns WFT per application until required WFT is achieved. Best results are obtained over a 2 pack polurethane primer/sealer. Do NOT use over N/C primer/sealer.

Mixing Ration: Mix 4L 0686A with 1L 0686B Hardener.

Drying:
- Dust free: 30mins
- Touch dry: 45mins
- Dry to tape: 4hours
- Hard dry: 16-24hours

Recoat time: wet on wet - under 2hours, or after 24 hours - with sanding.