Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

phone04-586 6681

BROWSEchevron_rightAUTOMOTIVE COATINGSchevron_right1K Clearcoats

Autothane 1K Diamond Clearcoat | 4 Litre 4 Litres 526-49594/4L


We pride ourselves on giving the best quality, brands and service. So if for any reason you're not happy with your purchase; contact us and we will do our best to rectify the problem.

Autothane 1K Diamond Clearcoat | 4 Litre

favorite_borderAdd to Favorites
Add To Cartexpand_lessexpand_more

An exceptional acrylic lacquer clearcoat which combines excellent application and polishing properties and a durable finish.

Product Data and instructions for use are as below and on the product's label.

Preparation of Substrate: 
Autothane 1K Diamond Clearcoat can be applied over suitably prepared original panels during blending with Dulon Basecoat or Solid Colour. After 20-30 minutes air flash at 25 degrees. Please note: Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for the intended use.

For complete panel or overall respray apply 3 - 4 full even coats. Air flash between coats. For part panel or spot repair, apply as for complete panel, extending each coat beyond the edge of the previous coat. Add up to a further 50% thinner to aid blending. Flash Off at 20 degrees 3-4 mins between coats at 20 degrees.

Drying Times: 
Air Dry @ 20 degrees; Dust Free 10-15 minutes at 20 degrees. Compound 6 hours at 20 degrees.

Please Note: Drying times will need to be extended under cooler conditions. Seek further advice before spraying.