clear

Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

phone04-586 6681
assignment_indRegister
shopping_cart
Untitled
Untitled
Untitled
Untitled

BROWSEchevron_rightPOR 15chevron_rightALL

fullscreen fullscreen_exit done_all launch
  • Priceexpand_less
  • min$0
  • max$400
AP-120 Metal Prep - 20OZ. 40020
zoom_inchevron_leftchevron_right
AP-120 Metal Prep - 20OZ. POR 15
$21.62
40020
check_box_outline_blank

Achieve the ultimate clear finish on polished metal, using the AP-120 Metal Prep.

AP120 is a water based metal prep specifically designed to achieve perfect adhesion to any metal surface, especially chrome or polished aluminum, and other reactive metals such as copper and brass, where good adhesion is often difficult to achieve. 

It can also be used to improve adhesion onto other surfaces eg. Chrome, Glass and Plastics.

Specially formulated to be used with POR-15 2K Urethane Clear for the proper preparation of alloys and brass to keep that clean metal look.

AP-120 is non-flammable with no noxious fumes.

Wear rubber or latex gloves when using. 

Size: 20oz. = 600mL

5+
Boss Gloss - 8OZ. 49263
zoom_in
Boss Gloss - 8OZ. POR 15
$22.75
49263
check_box_outline_blank

Clean & Protect Plastic, Rubber & Vinyl!

Treat and preserve plastic, rubber, and vinyl with POR-15 Boss Gloss. After we had tried some of the big national brands, we were disappointed with the way they seemed to fade away so quickly, and in no time at all, we had to reapply the stuff. Also, it seemed to attract dust. Our chemists told us that this was partly because the big companies reduce the amount of solids in their products to save costs, and partly because they use alcohol and other solvents. We decided to make our own premium quality product, in the style and tradition of all other POR-15 Products, with more solids, and NO alcohol or solvents which can remove vital plasticizers, and lower the life expectancy from vinyl and rubber. Our special combination of premium chemicals turned into a terrific product, which we call POR-15 Boss Gloss. We were delighted to learn that, as a side effect, Boss Gloss seems to repel dust too!

Try POR-15 Boss Gloss one time on the interior of your car, truck, or boat. You will be delighted at the results and pleased by how long it lasts. Your complete satisfaction is guaranteed!

NOTE: Not for use on cycle seats or other surfaces where a slippery surface could be hazardous

Size: 8oz = 236mL

5+
Cleaner Degreaser - Gallon Gallon 40101
zoom_inchevron_leftchevron_right
Cleaner Degreaser - Gallon POR 15
$47.10
40101
check_box_outline_blank

Formerly Marine Clean.

First step of the POR-15 3-Step System to Stop Rust Permanently. Cleaner Degreaser - Metal Prep - Rust Preventive Coating

Cleans and Degreases in One Application

POR-15 Cleaner Degreaser cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents. No other cleaner works as fast or as well.

It makes petroleum-based cleaners almost obsolete because POR-15 Cleaner Degreaser can be diluted with water up to 3, 4, 5 and even 10 times its volume while remaining more potent than other cleaners.

POR-15 Cleaner Degreaser removes grease, oil, mildew, algae, musty odors, soap films, wax. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts and more.

Before applying ANY rust preventive coating or paint, you MUST remove all oily film or residue to be completely certain of good adhesion.

Adhesion is important with most paints but has to be perfect for POR-15 to achieve its maximum effectiveness.

Applications:

  • Engines
  • Suspension Components
  • Transmissions
  • Grease Traps
  • Floor Pans
  • Fuel Tanks 
  • Frames
  • Rubber, Nylon, and Vinyl Water Line Scum

What we developed, POR-15 Cleaner Degreaser, contradicts all accepted theories about metal prep products: it\\\'s water-based, not solvent-based and it cleans without leaving residues. In laboratory adhesion tests, our POR-15  Rust Preventive coating using POR-15 Cleaner Degreaser first to clean the bare metal far exceeded every other prep product we found in the marketplace.

Size: Gallon = 3.78L 

5+
Cleaner Degreaser - Quart Quart 40104
zoom_inchevron_leftchevron_right
Cleaner Degreaser - Quart POR 15
$24.75
40104
check_box_outline_blank

Formerly Marine Clean.

First step of the POR-15 3-Step System to Stop Rust Permanently. Cleaner Degreaser - Metal Prep - Rust Preventive Coating.

Cleans and Degreases in One Application

POR-15 Cleaner Degreaser cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents. No other cleaner works as fast or as well.

It makes petroleum-based cleaners almost obsolete because POR-15 Cleaner Degreaser can be diluted with water up to 3, 4, 5 and even 10 times its volume while remaining more potent than other cleaners.

POR-15 Cleaner Degreaser removes grease, oil, mildew, algae, musty odors, soap films, wax. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts and more.

Before applying ANY rust preventive coating or paint, you MUST remove all oily film or residue to be completely certain of good adhesion.

Adhesion is important with most paints but has to be perfect for POR-15 to achieve its maximum effectiveness.

Applications:

  • Engines
  • Suspension Components
  • Transmissions
  • Grease Traps
  • Floor Pans
  • Fuel Tanks 
  • Frames
  • Rubber, Nylon, and Vinyl Water Line Scum

What we developed, POR-15 Cleaner Degreaser, contradicts all accepted theories about metal prep products: it\\\'s water-based, not solvent-based and it cleans without leaving residues. In laboratory adhesion tests, our POR-15  Rust Preventive coating using POR-15 Cleaner Degreaser first to clean the bare metal far exceeded every other prep product we found in the marketplace.

Size: Quart = 946mL 

5+
Detail Paint - Aerosol | Cast Aluminum - Size 15oz (A) 15oz (A) 41618
zoom_inchevron_leftchevron_right
Detail Paint - Aerosol | Cast Aluminum - Size 15oz (A) POR 15
$52.65
41618
check_box_outline_blank

Replicate the original look of metals on cast parts with POR-15 Detail Paint.

POR-15 Detail Paint provides a professional grade finish that reproduces the original look of cast parts. POR-15 Detail Paint is designed to have a low sheen, will not yellow and will keep your restored component looking factory new. 

POR-15 Detail Paint is formulated to provide maximum corrosion resistance and protect metal substrates against weather, sunlight, oil and water.

Available in 3 colors (Cast Iron, Aluminum & Stainless Steel)

Applications:

  • Master Cylinder
  • Steering Box
  • Transmission Housings
  • Hood Springs
  • Driveshaft
  • Suspension Components, etc

Size: 15oz = 425g

5+
Detail Paint - Aerosol | Cast Iron - Size 15oz (A) 15oz (A) 41718
zoom_inchevron_leftchevron_right
Detail Paint - Aerosol | Cast Iron - Size 15oz (A) POR 15
$52.65
41718
check_box_outline_blank

Replicate the original look of metals on cast parts with POR-15 Detail Paint.

POR-15 Detail Paint provides a professional grade finish that reproduces the original look of cast parts. POR-15 Detail Paint is designed to have a low sheen, will not yellow and will keep your restored component looking factory new. 

POR-15 Detail Paint is formulated to provide maximum corrosion resistance and protect metal substrates against weather, sunlight, oil and water.

Available in 3 colors (Cast Iron, Aluminum & Stainless Steel)

Applications:

  • Master Cylinder
  • Steering Box
  • Transmission Housings
  • Hood Springs
  • Driveshaft
  • Suspension Components, etc

Size: 15oz = 425g

5+
Detail Paint - Aerosol | Stainless Steel - Size 15oz (A) 15oz (A) 41818
zoom_inchevron_leftchevron_right
Detail Paint - Aerosol | Stainless Steel - Size 15oz (A) POR 15
$52.65
41818
check_box_outline_blank

Replicate the original look of metals on cast parts with POR-15 Detail Paint.

POR-15 Detail Paint provides a professional grade finish that reproduces the original look of cast parts. POR-15 Detail Paint is designed to have a low sheen, will not yellow and will keep your restored component looking factory new. 

POR-15 Detail Paint is formulated to provide maximum corrosion resistance and protect metal substrates against weather, sunlight, oil and water.

Available in 3 colors (Cast Iron, Aluminum & Stainless Steel)

Applications:

  • Master Cylinder
  • Steering Box
  • Transmission Housings
  • Hood Springs
  • Driveshaft
  • Suspension Components, etc

Size: 15oz = 425g

5+
Engine Enamel - Pint | Aluminum - Size Pint Pint 42008
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Aluminum - Size Pint POR 15
$53.97
42008
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Austin Healey Green - Size Pint Pint 42028
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Austin Healey Green - Size Pint POR 15
$53.97
42028
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Black Pint 42038
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Black POR 15
$53.97
42038
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Buick Green - Size Pint Pint 42058
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Buick Green - Size Pint POR 15
$53.97
42058
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Cadillac Dark Blue - Size Pint Pint 42088
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Cadillac Dark Blue - Size Pint POR 15
$53.97
42088
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Chevrolet Blue - Size Pint Pint 42078
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Chevrolet Blue - Size Pint POR 15
$53.97
42078
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Chevrolet Red - Size Pint Pint 42148
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Chevrolet Red - Size Pint POR 15
$53.97
42148
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Chevy Orange - Size Pint Pint 42268
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Chevy Orange - Size Pint POR 15
$53.97
42268
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Chrysler Blue - Size Pint Pint 42108
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Chrysler Blue - Size Pint POR 15
$53.97
42108
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Chrysler Hemi Orange - Size Pint Pint 42188
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Chrysler Hemi Orange - Size Pint POR 15
$53.97
42188
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Chrysler Turquoise - Size Pint Pint 42128
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Chrysler Turquoise - Size Pint POR 15
$53.97
42128
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Classic Ford Red - Size Pint Pint 42098
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Classic Ford Red - Size Pint POR 15
$53.97
42098
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Ford Blue - Size Pint Pint 42158
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Ford Blue - Size Pint POR 15
$53.97
42158
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Ford Corporate Blue - Size Pint Pint 42048
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Ford Corporate Blue - Size Pint POR 15
$53.97
42048
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Ford Green - Size Pint Pint 42168
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Ford Green - Size Pint POR 15
$53.97
42168
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Hi Po Yellow - Size Pint Pint 42198
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Hi Po Yellow - Size Pint POR 15
$53.97
42198
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | MG Maroon - Size Pint Pint 42208
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | MG Maroon - Size Pint POR 15
$53.97
42208
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | Olds Gold - Size Pint Pint 42228
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | Olds Gold - Size Pint POR 15
$53.97
42228
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Pint | White - Size Pint Pint 42238
zoom_inchevron_leftchevron_right
Engine Enamel - Pint | White - Size Pint POR 15
$53.97
42238
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Typically, a pint is enough for an entire engine. 

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Pint = 473mL

5+
Engine Enamel - Quart | Black Quart 42034
zoom_inchevron_leftchevron_right
Engine Enamel - Quart | Black POR 15
$82.64
42034
check_box_outline_blank

*Colours displayed are only close estimations of the true colour

POR-15 Engine Enamels are a superior quality paint with 80% solids (pigments). This durable direct to metal coating creates a smooth, high-gloss finish that keeps engine surfaces from pitting and rusting, and that withstands the rigors of the engine compartment while improving the look and preventing corrosion of the metal components.

POR-15 Engine Enamel withstands intermittent temperatures up to 260oC.

In addition to its exceptional long-term gloss and color retention it resists damage from oil, gas, grease, salt, humidity, solvents and of course rust.

POR-15 Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer than any other product. Try it, compare it - you\\\'ll see what we mean.  

Our enamels are non-flammable and conform to even the strictest California environmental standards.

Do not use this product to coat exhaust systems. 

Application: Apply in well-ventilated area only. Ideal ambient temperature for application is 70F (22C), but an acceptable temperature range is between 50-80F(12- 28C). Mix POR-15 Engine Enamels by stirring only. Do not shake. 

Thinning Ratio: Do not thin more than 20% (1 part thinner to 5 parts enamel). Thin with POR-15 solvent. POR-15 Engine Enamels can usually be brushed without thinning. A full coat will cover completely with excellent color depth. If a second coat is desired, wait 24 hours before topcoating. 

Dry Time: Allow 8 hours for enamel to dry tack-free. Wait 4-6 days before starting engine.

One pint will cover any standard automobile engine block.

Size: Quart = 946mL

5+
Epoxy Putty | 16oz - Size 475g 475g 49033
zoom_in
Epoxy Putty | 16oz - Size 475g POR 15
$64.92
49033
check_box_outline_blank

\\\"Unbelievable\\\", that\\\'s what restorers say when they see a demonstration of this incredible Epoxy Putty product.

It\\\'s so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers.

And since it is WATER BASED, you can simply wet your fingers and work it until it is almost perfectly smooth before it dries - elminating most sanding! But when it cures, it\\\'s ROCK HARD, making it perfect for repairing steel, plastics, concrete etc. Amazingly, it even sticks to damp surfaces, and will cure underwater, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures and so much more. Put some Epoxy Putty in your tool box today. You\\\'ll find yourself using it all over your shop and home. 

Features:

  • Malleable consistency, fill in anywhere
  • Hardens like steel
  • Mixes like clay & cures in water
  • No measuring or weighing
  • Stays in place, doesn\\\'t slump or sag
  • Can be sanded, drilled, machined, sawed and painted
5+
Floor Pan & Trunk Restoration Kit 49519
zoom_inchevron_leftchevron_right
Floor Pan & Trunk Restoration Kit POR-15
$330.94
49519
check_box_outline_blank

Complete Kit with everything you need to restore your Floor Pan or Trunk Space.

Your restoration will be better than replacement because you\\\'ll never see rust again, whether it\\\'s a daily driver or a show car. You can maintain the integrity of the structure with no ugly welded seams.

Our easy step-by-step instructions make it simple to restore floor pans, trunk pans, pickup truck beds, etc.

Kit Contents:

  • Cleaner Degreaser
  • Metal Prep
  • PowerMesh Reinforcing Fabric
  • POR Epoxy Putty
  • POR-15 (Silver and Gloss Black)
  • Top Coat Chassis Black
  • Solvent
  • Brushes
  • Safety Face Mask
  • Latex Gloves
  • Dispensing Scoop
  • Detailed Instructions
5+
Fuel Tank Repair Kit 49239
zoom_inchevron_leftchevron_right
Fuel Tank Repair Kit POR 15
$174.51
49239
check_box_outline_blank

POR-15 Fuel Tank Repair Kit is more than just pouring in a quart of sealer and sloshing it around. If gum, varnish, sludge, or fuel are inside, they must be removed first.

Our POR-15 Fuel Tank Sealer, like all other sealers, will not work in a contaminated tank. Find out what the pros already know... our POR-15 Fuel Tank Repair Kit has everything you need to do the job right!

Kit Contains:

  • POR-15 Cleaner Degreaser to remove gum, sludge, varnish
  • POR-15 Metal Prep to remove rust & prepare tank for sealer
  • POR-15 Fuel Tank Sealer to permanently seal tank
  • Detailed Instructions so you\\\'ll do the job right.
5+
Fuel Tank Sealer - Gallon Gallon 49201
zoom_inchevron_leftchevron_right
Fuel Tank Sealer - Gallon POR 15
$250.08
49201
check_box_outline_blank

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15 Fuel Tank Sealer has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing).

Forget zinc chromate and rust inhibitors. The only way to stop rust is to keep moisture away from the metal. Only a non porous coating can keep moisture away from metal.

And we make the only one that\\\'s been tested and proven to work with all fuels. It has superior strength and fuel resistance and is non flammable. 

Though for any tank sealer to work properly the tank must be free of contaminants, hence we usually sell this product as part of our money saving kits.

POR-15 Fuel Tank Sealer is non-flammable and is environmentally safe.

Features:

  • Resistant to all fuels, alcohol, additives and solvents
  • Stops rust, corrosion and leaks
  • Seals pinholes and seams
  • Permanently flexible
  • Chemically bonds to metal surfaces (even rusted)
  • Light gray colour for easier viewing inside the tank
  • One quart is capable of sealing a 25 gal tank

Size: Gallon = 3.78L

5+
Fuel Tank Sealer - Half-Pint Half-Pint 49216
zoom_inchevron_leftchevron_right
Fuel Tank Sealer - Half-Pint POR 15
$27.77
49216
check_box_outline_blank

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15 Fuel Tank Sealer has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing).

Forget zinc chromate and rust inhibitors. The only way to stop rust is to keep moisture away from the metal. Only a non porous coating can keep moisture away from metal.

And we make the only one that\\\'s been tested and proven to work with all fuels. It has superior strength and fuel resistance and is non flammable. 

Though for any tank sealer to work properly the tank must be free of contaminants, hence we usually sell this product as part of our money saving kits.

POR-15 Fuel Tank Sealer is non-flammable and is environmentally safe.

Features:

  • Resistant to all fuels, alcohol, additives and solvents
  • Stops rust, corrosion and leaks
  • Seals pinholes and seams
  • Permanently flexible
  • Chemically bonds to metal surfaces (even rusted)
  • Light gray colour for easier viewing inside the tank
  • One quart is capable of sealing a 25 gal tank

Size: Half-Pint = 236mL

5+
Fuel Tank Sealer - Pint Pint 49208
zoom_inchevron_leftchevron_right
Fuel Tank Sealer - Pint POR 15
$50.03
49208
check_box_outline_blank

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15 Fuel Tank Sealer has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing).

Forget zinc chromate and rust inhibitors. The only way to stop rust is to keep moisture away from the metal. Only a non porous coating can keep moisture away from metal.

And we make the only one that\\\'s been tested and proven to work with all fuels. It has superior strength and fuel resistance and is non flammable. 

Though for any tank sealer to work properly the tank must be free of contaminants, hence we usually sell this product as part of our money saving kits.

POR-15 Fuel Tank Sealer is non-flammable and is environmentally safe.

Features:

  • Resistant to all fuels, alcohol, additives and solvents
  • Stops rust, corrosion and leaks
  • Seals pinholes and seams
  • Permanently flexible
  • Chemically bonds to metal surfaces (even rusted)
  • Light gray colour for easier viewing inside the tank
  • One quart is capable of sealing a 25 gal tank

Size: Pint = 473mL

5+
Fuel Tank Sealer - Quart Quart 49204
zoom_inchevron_leftchevron_right
Fuel Tank Sealer - Quart POR 15
$86.89
49204
check_box_outline_blank

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15 Fuel Tank Sealer has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing).

Forget zinc chromate and rust inhibitors. The only way to stop rust is to keep moisture away from the metal. Only a non porous coating can keep moisture away from metal.

And we make the only one that\\\'s been tested and proven to work with all fuels. It has superior strength and fuel resistance and is non flammable. 

Though for any tank sealer to work properly the tank must be free of contaminants, hence we usually sell this product as part of our money saving kits.

POR-15 Fuel Tank Sealer is non-flammable and is environmentally safe.

Features:

  • Resistant to all fuels, alcohol, additives and solvents
  • Stops rust, corrosion and leaks
  • Seals pinholes and seams
  • Permanently flexible
  • Chemically bonds to metal surfaces (even rusted)
  • Light gray colour for easier viewing inside the tank
  • One quart is capable of sealing a 25 gal tank

Size: Quart = 946mL

5+
High Temp - 8OZ. | Aluminum 8oz 44316
zoom_inchevron_leftchevron_right
High Temp - 8OZ. | Aluminum POR 15
$39.24
44316
check_box_outline_blank

Guaranteed to maintain rich, brilliant colors without burning off or discoloring.

POR-15 High Temp Paint is guaranteed to maintain rich, brilliant colors without burning off or discoloring.

POR-15 High Temp Paint is capable of withstanding extreme temperatures up to 1200degF and will resist cracking, chipping, and peeling. It is also extremely weather, salt and moisture resistant.

We guarantee this to be the most uniform heat-resistant coating available anywhere.

Sandblasting is the optimum surface preparation.

Can be used on all cars, domestic or foreign. 

Meets or exceeds properties and requirements of MIL-C-13370.

For exhaust components 8oz. (236mL) will coat an average set of manifolds and a small set of headers.

Size: 8oz = 236mL

5+
High Temp - 8OZ. | Flat Black 8oz 44116
zoom_inchevron_leftchevron_right
High Temp - 8OZ. | Flat Black POR 15
$39.24
44116
check_box_outline_blank

Guaranteed to maintain rich, brilliant colors without burning off or discoloring.

POR-15 High Temp Paint is guaranteed to maintain rich, brilliant colors without burning off or discoloring.

POR-15 High Temp Paint is capable of withstanding extreme temperatures up to 1200degF and will resist cracking, chipping, and peeling. It is also extremely weather, salt and moisture resistant.

We guarantee this to be the most uniform heat-resistant coating available anywhere.

Sandblasting is the optimum surface preparation.

Can be used on all cars, domestic or foreign. 

Meets or exceeds properties and requirements of MIL-C-13370.

For exhaust components 8oz. (236mL) will coat an average set of manifolds and a small set of headers.

Size: 8oz = 236mL

5+