clear

Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

phone04-586 6681
assignment_indRegister
shopping_cart
Untitled
Untitled
Untitled
Untitled

BROWSEchevron_rightAUTOMOTIVE COATINGSchevron_rightALL

Customised Mixes - Information
zoom_in
Customised Mixes - Information PPG
$0.00
check_box_outline_blank

Is there a colour mix you require? Give us a call and we can load a customised mix to the website for you to purchase. 

CONTACT US | 04-586 6681 

5+
DMX211 - Orange Dye | Per Gram Per Gram 452-DMX211/PG
zoom_inchevron_leftchevron_right
DMX211 - Orange Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX211/PG
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX212 - Yellow Shade Red Dye | Per Gram Per Gram 452-DMX212/PERGRAM
zoom_inchevron_leftchevron_right
DMX212 - Yellow Shade Red Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX212/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \\\'candy apple\\\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX213 - Blue Shade Red Dye | Per Gram Per Gram 452-DMX213/PERGRAM
zoom_inchevron_leftchevron_right
DMX213 - Blue Shade Red Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX213/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX214 - Red Violet Dye | Per Gram Per Gram 452-DMX214/PERGRAM
zoom_inchevron_leftchevron_right
DMX214 - Red Violet Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX214/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX215 - Violet Dye | Per Gram Per Gram 452-DMX215/PERGRAM
zoom_inchevron_leftchevron_right
DMX215 - Violet Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX215/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX216 - Green Shade Blue Dye | Per Gram Per Gram 452-DMX216/PERGRAM
zoom_inchevron_leftchevron_right
DMX216 - Green Shade Blue Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX216/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX217 - Green Dye | Per Gram Per Gram 452-DMX217/PERGRAM
zoom_inchevron_leftchevron_right
DMX217 - Green Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX217/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX218 - Brown Dye | Per Gram Per Gram 452-DMX218/PERGRAM
zoom_inchevron_leftchevron_right
DMX218 - Brown Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX218/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX219 - Black Dye | Per Gram Per Gram 452-DMX219/PERGRAM
zoom_inchevron_leftchevron_right
DMX219 - Black Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX219/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
DMX220 - Red Shade Blue Dye | Per Gram Per Gram 452-DMX220/PERGRAM
zoom_inchevron_leftchevron_right
DMX220 - Red Shade Blue Dye | Per Gram PPG - RADIANCE
$1.00
452-DMX220/PERGRAM
check_box_outline_blank

Radiance II Basecoats are a three-layer system, which offer high levels of depth and colour. These are formulated from standard BC tinters.The first layer is referred to as the groundcoat.  The midcoat layer contains dyes to give a \'candy apple\' effect.

Radiance II Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Radiance II mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Radiance II mixing D895/BC 100 grams/parts DMX Dyes up to 10 grams/parts Then activate as above.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC. 

Number of Coats: BC groundcoat 2-3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required).

Radiance II midcoat 2-4 coats or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
Prizmatique | Per Gram Per Gram DX78/PERGRAM
zoom_inchevron_leftchevron_right
Prizmatique | Per Gram PPG - PRIZMATIQUE PIGMENT
$3.65
DX78/PERGRAM
check_box_outline_blank

Prizmatique contains glittering multi-coloured flakes, which transition with movement. When layered over a base colour, Prizmatique offers an almost holographic appearance of rainbow colour. The first layer is referred to as the groundcoat.

These are formulated from standard BC tinters. The midcoat layer contains Prizmatique to give a holographic effect. Prizmatique Basecoats are recommended for experienced spray painters who wish to achieve a unique finish.

MIXING RATIO:
Activated Basecoat and Prizmatique mixed colour BC 8 parts by volume; D841 1 part by volume; Thinner 7 parts by volume. Custom Prizmatique mixing D895/BC 100 grams/parts DX78 up to 5 grams/parts.

NOTE: GRS BC (Basecoat) activation will be necessary for multi-layer applications (both the groundcoat and midcoat), high film builds (i.e. more than four coats), commercial vehicles, motorbikes, or wheel painting where a higher impact resistance is necessary. This applies to PPG Custom finishes within the Vibrance collection, such as Liquid Crystal, Crystal Pearls, Harlequin, Radiance ll candy, Prizmatique and multi-layer finishes. Tape times will need to be extended to 30 minutes at 20oC.

Number of Coats: BC groundcoat 2 - 3 medium wet coats or until hiding is achieved. (+ 1 light control coat if required) Prizmatique midcoat 2-4 or until colour is achieved. The correct technique must be used to minimise overlaps and achieve a uniform effect.

5+
PRLX1 - Crystal Red Pearl | Per Gram Per Gram PRLX1/PERGRAM
zoom_inchevron_leftchevron_right
PRLX1 - Crystal Red Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX1/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX2 - Crystal Silver Pearl | Per Gram Per Gram PRLX2/PERGRAM
zoom_inchevron_leftchevron_right
PRLX2 - Crystal Silver Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX2/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX3 - Crystal Gold Pearl | Per Gram Per Gram PRLX3/PERGRAM
zoom_inchevron_leftchevron_right
PRLX3 - Crystal Gold Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX3/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX4 - Crystal Blue Pearl | Per Gram Per Gram PRLX4/PERGRAM
zoom_inchevron_leftchevron_right
PRLX4 - Crystal Blue Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX4/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX5 - Crystal Green Pearl | Per Gram Per Gram PRLX5/PERGRAM
zoom_inchevron_leftchevron_right
PRLX5 - Crystal Green Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX5/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX6 - Crystal Frost Red Pearl | Per Gram Per Gram PRLX6/PERGRAM
zoom_inchevron_leftchevron_right
PRLX6 - Crystal Frost Red Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX6/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX7 - Crystal Copper Pearl | Per Gram Per Gram PRLX7/PERGRAM
zoom_inchevron_leftchevron_right
PRLX7 - Crystal Copper Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX7/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX8 - Crystal Turquoise Pearl | Per Gram Per Gram PRLX8/PERGRAM
zoom_inchevron_leftchevron_right
PRLX8 - Crystal Turquoise Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX8/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
PRLX9 - Crystal Amethyst Pearl | Per Gram Per Gram PRLX9/PERGRAM
zoom_inchevron_leftchevron_right
PRLX9 - Crystal Amethyst Pearl | Per Gram PPG - CRYSTAL PEARL
$5.50
PRLX9/PERGRAM
check_box_outline_blank

*Quantity Per Gram

Crystal Pearl and Liquid Crystal are unique selections of clear and colour shifting crystal particles that generally enhance basecoat colour with a crisp and vivid sparkle effect. Users have the flexibility to intermix these unique pigments with existing colour or use them as a mid-coat to create one-of-a-kind colours.

Products: Crystal Pearl Base Coat Colour

Deltron Thinners:

  • D870/4L
  • D807/4L
  • DT830/5L

Deltron MS Hardener:

  • D841/1L

Mixing Ratios are as on Spec Sheet.

5+
Touch Up Bottle - Primer TOUCHPRIMER
zoom_in
Touch Up Bottle - Primer PPG
$10.50
TOUCHPRIMER
check_box_outline_blank

Touch Up Bottle - Primer 

5+
Touch Up Bottle - Clearcoat TOUCHCLEAR
zoom_in
Touch Up Bottle - Clearcoat PPG
$13.50
TOUCHCLEAR
check_box_outline_blank

Touch up Clearcoat Bottle

5+
1K Prefilled Solvent | 400mL - Size 400mL 400mL ET300007
zoom_inchevron_leftchevron_right
1K Prefilled Solvent | 400mL - Size 400mL ETALON
$15.00
ET300007
check_box_outline_blank

Pre-charged aerosol can be filled with up to 100mL solvent-based paint

Paint not provided - for custom-made spray can look at product listing: AEROFILL

5+
Silicon Remover | 1 Litre 1 Litre ET/ANTISIL-1
zoom_inchevron_leftchevron_right
Silicon Remover | 1 Litre ETALON
$15.00
ET/ANTISIL-1
check_box_outline_blank

Etalon Silicon Remover is a high quality solvent to be used for cleaning and degreasing all car surfaces prior to painting. Put it on with a lint-free clean cloth and remove with a different cloth.

5+
Wax and Grease Remover | 1 Litre 1 Litre PREP1
zoom_in
Wax and Grease Remover | 1 Litre PPG
$15.00
PREP1
check_box_outline_blank

Wax and Grease Remover is a pre-painting solvent based cleaning fluid, ideal for removal of silicone, tar, bitumen, waxes, grease, glue residues, automotives polishes and other surface contaminants prior to automotive refinishing operations. Safe to use on most painted surfaces, rubber, plastic trims and non-tinted automotive glass.

5+
804 AntiSilicone Fish Eye Killer | 250mL 1105
zoom_inchevron_leftchevron_right
804 AntiSilicone Fish Eye Killer | 250mL HB BODY
$15.25
1105
check_box_outline_blank

Additive suitable for the prevention and confrontation of silicone craters.

10mL of 804 Fish Eye Killer (one cap approx.) is added to 500mL (one gravity spray gun vase) of mixed paint. The mix then must be applied in light coats over the craters until they disappear. After adding Anti Silicone 804 to the paint mix ensure that is mixed well.

Available in 250mL Transparent.

0
Touch Up Bottle - Paint Match TOUCH
zoom_in
Touch Up Bottle - Paint Match PPG
$16.50
TOUCH
check_box_outline_blank

Need a Touch Up Bottle matched to the colour you\\\'re after?

If you know the colour you are after, put all the colour information we need to mix it up for you in the Special Instructions part at Proccessing and CheckOut.

Give us a call if you need a hand.

CONTACT US | 04-586 6681 

5+
CQ Punch N Pour Dispenser PUNCHNPOUR
zoom_in
CQ Punch N Pour Dispenser Generic
$17.17
PUNCHNPOUR
check_box_outline_blank

Self piercing through metal paint can or tin. Suits cans from 250ml to 20 litres. Can be transferred from can to can. Eliminates drips and mess while pouring. Cap for air tight storage. Made from virgin materials and therefore food grade and can be used with cooking oils and similar products.

5+
Windscreen Primer | 30mL - Size 30mL 30mL ET/P-901
zoom_inchevron_leftchevron_right
Windscreen Primer | 30mL - Size 30mL ETALON
$17.64
ET/P-901
check_box_outline_blank

Etalon 30mL Primer/Activator - Black

For use with Etalon Windscreen Adhesive

5+
Touch Up Bottle - 2 in 1 TOUCH21
zoom_in
Touch Up Bottle - 2 in 1 PPG
$18.00
TOUCH21
check_box_outline_blank

Touch up Bottle - 2 in 1 

5+
Black Structure Bumper Spray | 400g ET874002-B
zoom_inchevron_leftchevron_right
Black Structure Bumper Spray | 400g ETALON
$19.49
ET874002-B
check_box_outline_blank

Quick drying; Easy to use paint.

Especially designed for painting flexible plastic surfaces, such as cars\\\' plastic bumpers.

5+
Two Way Thinner | 1 Litre 1 Litre 921-00251/1L
zoom_inchevron_leftchevron_right
Two Way Thinner | 1 Litre PPG
$21.51
921-00251/1L
check_box_outline_blank

Two Way Thinner is a product used with 1K Primers, 1K Clearcoats, Dulon Tinters and Colours, Lacquer. Mixing ratios are on the tin.

5+
Autothane 1K Diamond Clearcoat | 500mL 500mL 526-49594/500
zoom_inchevron_leftchevron_right
Autothane 1K Diamond Clearcoat | 500mL PPG
$22.64
526-49594/500
check_box_outline_blank

An exceptional acrylic lacquer clearcoat which combines excellent application and polishing properties and a durable finish.

Product Data and instructions for use are as below and on the product\\\'s label.

Preparation of Substrate: 
Autothane 1K Diamond Clearcoat can be applied over suitably prepared original panels during blending with Dulon Basecoat or Solid Colour. After 20-30 minutes air flash at 25 degrees. Please note: Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for the intended use.

Application:
For complete panel or overall respray apply 3 - 4 full even coats. Air flash between coats. For part panel or spot repair, apply as for complete panel, extending each coat beyond the edge of the previous coat. Add up to a further 50% thinner to aid blending. Flash Off at 20 degrees 3-4 mins between coats at 20 degrees.

Drying Times: 
Air Dry @ 20 degrees; Dust Free 10-15 minutes at 20 degrees. Compound 6 hours at 20 degrees.

Please Note: Drying times will need to be extended under cooler conditions. Seek further advice before spraying. 

5+
Autothane Hi Opacity - White | 500mL 500mL 526-49591/500
zoom_inchevron_leftchevron_right
Autothane Hi Opacity - White | 500mL PPG
$22.64
526-49591/500
check_box_outline_blank

A high opacity acrylic lacquer topcoat which requires minimal compounding to provide a full depth gloss finish. It has excellent adhesion over correctly prepared original finishes and PPG acrylic lacquer primers.

MIXING RATIO:
By volume: Dulon AAA Solid Colour 1 part; Dulon AAA Thinner 1-1.5 parts

APPLICATION:
Apply 4-6 single coats. Air flash between coats. For spot repairs, extend each coat well beyond the edge of the previous coat. Thin a further 50% with Dulon AAA Thinner when blending out.

FLASH OFF TIME:
2 - 3 minutes between coats at 25oC.

DRYING TIMES:
Air Dry: Dust Free 10 - 15 minutes at 25oC Compound 6 hours at 25oC.

Compounding/Polishing: Allow at least 6 hours air dry, preferably overnight drying before compounding.

5+
Autothane Primer 1K Filler | 500mL 500mL 289-49595/500ML
zoom_inchevron_leftchevron_right
Autothane Primer 1K Filler | 500mL PPG
$22.64
289-49595/500ML
check_box_outline_blank

A high build lacquer primer filler with good holdout and easy sanding. It can be thinned for use as a filler or primer surfacer, and is suitable for use in bodyshop car refinishing. Ideal for top coating with Dulon Acrylic lacquer. 

Substrates: Autothane Primer Filler can be applied over suitably prepared steel after degreasing with Prepsol and conditioning with Deoxidine 624.; Sound existing paint finishes which have been degreased with prepsol and sanded with P240- P320 dry.; Fibreglass (GRP) after removing mould release agent using bodykleen, degreasing with prepsol and sanding with P400 dry; Polyester body fillers and putties.

Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for its intended use. 

5+