clear

Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

phone04-586 6681
assignment_indRegister
shopping_cart
Untitled
Untitled
Untitled
Untitled

BROWSEchevron_rightAUTOMOTIVE COATINGSchevron_rightALL

804 AntiSilicone Fish Eye Killer | 250mL 1105
zoom_inchevron_leftchevron_right
804 AntiSilicone Fish Eye Killer | 250mL HB BODY
$15.25
1105
check_box_outline_blank

Additive suitable for the prevention and confrontation of silicone craters.

10mL of 804 Fish Eye Killer (one cap approx.) is added to 500mL (one gravity spray gun vase) of mixed paint. The mix then must be applied in light coats over the craters until they disappear. After adding Anti Silicone 804 to the paint mix ensure that is mixed well.

Available in 250mL Transparent.

0
Global Spectral Grey Panel 952-58177/UNIT
zoom_in
Global Spectral Grey Panel PPG
$37.31
952-58177/UNIT
check_box_outline_blank
0
Global Spectral Grey Panel 952-58178/UNIT
zoom_in
Global Spectral Grey Panel PPG
$37.31
952-58178/UNIT
check_box_outline_blank
0
Global Spectral Grey Panel 952-58176/UNIT
zoom_in
Global Spectral Grey Panel PPG
$37.31
952-58176/UNIT
check_box_outline_blank
0
106 Gunwash | 20 Litres - Size 20 Litres 20 Litres 0106/20L
zoom_inchevron_leftchevron_right
106 Gunwash | 20 Litres - Size 20 Litres PPG
$84.69
0106/20L
check_box_outline_blank

A specially blended thinner for the general purpose cleaning of spray equipment.

5+
150 X Painters Library 952-45898/UNIT
zoom_in
150 X Painters Library PPG
$65.65
952-45898/UNIT
check_box_outline_blank
5+
1K Acrylic Primer - Grey | 1kg 1kg ET5600AP-01
zoom_inchevron_leftchevron_right
1K Acrylic Primer - Grey | 1kg ETALON
$34.99
ET5600AP-01
check_box_outline_blank

1K primer with high filling power. Ideal for new parts, fast jobs and spot repairs. Can be applied on metal, steel, galvanised steel and aluminium. Easy application and sanding. VOC compliant. 

5+
1K Acrylic Primer - Grey | 4kg 4kg ET5600AP-04
zoom_inchevron_leftchevron_right
1K Acrylic Primer - Grey | 4kg ETALON
$95.00
ET5600AP-04
check_box_outline_blank

1K primer with high filling power. Ideal for new parts, fast jobs and spot repairs. Can be applied on metal, steel, galvanised steel and aluminium. Easy application and sanding. VOC compliant. 

5+
1K CT Etch Primer - Black | 1 Litre 1 Litre 466-49318/1L
zoom_inchevron_leftchevron_right
1K CT Etch Primer - Black | 1 Litre PPG - CT
$45.00
466-49318/1L
check_box_outline_blank

CT Etch Primers are single component, chromate free, general purpose acid etching, air-dry primers. They are recommended for use in Commercial Transport vehicle and component painting. They have good adhesion and give corrosion protection to a variety of substrates. These include aluminium, steel, galvanised steel and speciality steel substrates such as Zincalume and Zinanneal.

One pack chromate-free product. Multi-substrate compatibility. Acid etching characteristics. Air dry and wet-on-wet capability. Excellent application properties. Based on tough epoxy resin. Multi-topcoat compatibility.

Features:
Easy to use, less harmful product. One product required/reduced stock holding. Good adhesion to a range of substrates. High productivity and topcoat holdout. Good coverage, flow and appearance.
Good corrosion resistance and mechanical properties. Use under 1K & 2K topcoats.

Ideal Use:
Air dry: 30 minutes minimum at 25oC before denibbing and/or overcoating. For optimum performance: air dry 2 hours or overnight at 25oC before denibbing and/or overcoating. 1-2 even wet coats to give a dry film build of 20-40 mm.

5+
1K CT Etch Primer - Black | 4 Litres 4 Litres 466-49318/4L
zoom_inchevron_leftchevron_right
1K CT Etch Primer - Black | 4 Litres PPG - CT
$113.79
466-49318/4L
check_box_outline_blank

CT Etch Primers are single component, chromate free, general purpose acid etching, air-dry primers. They are recommended for use in Commercial Transport vehicle and component painting. They have good adhesion and give corrosion protection to a variety of substrates. These include aluminium, steel, galvanised steel and speciality steel substrates such as Zincalume and Zinanneal.

One pack chromate-free product. Multi-substrate compatibility. Acid etching characteristics. Air dry and wet-on-wet capability. Excellent application properties. Based on tough epoxy resin. Multi-topcoat compatibility.

Features: 
Easy to use, less harmful product. One product required/reduced stock holding. Good adhesion to a range of substrates. High productivity and topcoat holdout. Good coverage, flow and appearance.
Good corrosion resistance and mechanical properties. Use under 1K & 2K topcoats.

Ideal Use:
Air dry: 30 minutes minimum at 25oC before denibbing and/or overcoating. For optimum performance: air dry 2 hours or overnight at 25oC before denibbing and/or overcoating. 1-2 even wet coats to give a dry film build of 20-40 mm.

5+
1K CT Etch Primer - Grey | 1 Litre 1 Litre 466-48394/1L
zoom_inchevron_leftchevron_right
1K CT Etch Primer - Grey | 1 Litre PPG - CT
$45.00
466-48394/1L
check_box_outline_blank

CT Etch Primers are single component, chromate free, general purpose acid etching, air-dry primers. They are recommended for use on Commercial Transport vehicles and component painting.
They have good adhesion and give corrosion protection to a variety of substrates. These include aluminium, steel, galvanised steel and speciality steel substrates such as Zincalume and Zinanneal.

One pack chromate-free product. Multi-substrate compatibility. Acid etching characteristics. Air dry and wet-on-wet capability. Excellent application properties. Based on tough epoxy resin. Multi-topcoat compatibility.

Features:
Easy to use, less harmful product. One product required/reduced stock holding. Good adhesion to a range of substrates. High productivity and topcoat holdout. Good coverage, flow and appearance.
Good corrosion resistance and mechanical properties. Use under 1K & 2K topcoats.

Ideal Use:
Air dry: 30 minutes minimum at 25oC before denibbing and/or overcoating. For optimum performance, air dry 2 hours or overnight at 25oC before denibbing and/or overcoating. 1-2 even wet coats to give a dry film build of 20-40 mm.

5+
1K CT Etch Primer - Grey | 20 Litres 20 Litres 466-48394/20L
zoom_inchevron_leftchevron_right
1K CT Etch Primer - Grey | 20 Litres PPG - CT
$526.21
466-48394/20L
check_box_outline_blank

CT Etch Primers are single component, chromate free, general purpose acid etching, air-dry primers. They are recommended for use on Commercial Transport vehicles and component painting.
They have good adhesion and give corrosion protection to a variety of substrates. These include aluminium, steel, galvanised steel and speciality steel substrates such as Zincalume and Zinanneal.

One pack chromate-free product. Multi-substrate compatibility. Acid etching characteristics. Air dry and wet-on-wet capability. Excellent application properties. Based on tough epoxy resin. Multi-topcoat compatibility.

Features: 
Easy to use, less harmful product. One product required/reduced stock holding. Good adhesion to a range of substrates. High productivity and topcoat holdout. Good coverage, flow and appearance.
Good corrosion resistance and mechanical properties. Use under 1K & 2K topcoats.

Ideal Use:
Air dry: 30 minutes minimum at 25oC before denibbing and/or overcoating. For optimum performance, air dry 2 hours or overnight at 25oC before denibbing and/or overcoating. 1-2 even wet coats to give a dry film build of 20-40 mm.

5+
1K CT Etch Primer - Grey | 4 Litres 4 Litres 466-48394/4L
zoom_inchevron_leftchevron_right
1K CT Etch Primer - Grey | 4 Litres PPG - CT
$116.92
466-48394/4L
check_box_outline_blank

CT Etch Primers are single component, chromate free, general purpose acid etching, air-dry primers. They are recommended for use on Commercial Transport vehicles and component painting.
They have good adhesion and give corrosion protection to a variety of substrates. These include aluminium, steel, galvanised steel and speciality steel substrates such as Zincalume and Zinanneal.

One pack chromate-free product. Multi-substrate compatibility. Acid etching characteristics. Air dry and wet-on-wet capability. Excellent application properties. Based on tough epoxy resin. Multi-topcoat compatibility.

Features: 
Easy to use, less harmful product. One product required/reduced stock holding. Good adhesion to a range of substrates. High productivity and topcoat holdout. Good coverage, flow and appearance.
Good corrosion resistance and mechanical properties. Use under 1K & 2K topcoats.

Ideal Use:
Air dry: 30 minutes minimum at 25oC before denibbing and/or overcoating. For optimum performance, air dry 2 hours or overnight at 25oC before denibbing and/or overcoating. 1-2 even wet coats to give a dry film build of 20-40 mm.

5+
1K Prefilled Solvent | 400mL - Size 400mL 400mL ET300007
zoom_inchevron_leftchevron_right
1K Prefilled Solvent | 400mL - Size 400mL ETALON
$15.00
ET300007
check_box_outline_blank

Pre-charged aerosol can be filled with up to 100mL solvent-based paint

Paint not provided - for custom-made spray can look at product listing: AEROFILL

5+
1K Premium Clearcoat | 1 Litre 1 Litre 526-48213/1L
zoom_inchevron_leftchevron_right
1K Premium Clearcoat | 1 Litre PPG - DULON
$60.42
526-48213/1L
check_box_outline_blank

An exceptional lacquer clearcoat which combines excellent application and polishing properties and a durable finish.

Preparation of Substrate:

Premium 1K Clearcoat can be applied over suitably prepared:

  • COBRA Basecoat and Dulon Basecoat after 20-30 minutes air flash at 25oC.
  • Suitably prepared original panels during blending.

Please note: Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for the intended use.

Application:

For complete panel or overall respray apply 3 - 4 full even coats. Air flash between coats. For part panel or spot repair, apply as for complete panel, extending each coat beyond the edge of the previous coat. Add up to a further 50% thinner to aid blending. Flash Off at 20oC 3 - 4 mins between coats at 20oC

Drying Times:
Air Dry @ 20oC. Dust Free: 10 - 15 minutes at 20oC. Compound: 6 hours at 20oC

Please Note: Drying times will need to be extended under cooler conditions. Seek further advice before spraying. 

5+
1K Premium Clearcoat | 4 Litres 4 Litres 526-48213/4L
zoom_inchevron_leftchevron_right
1K Premium Clearcoat | 4 Litres PPG - DULON
$179.49
526-48213/4L
check_box_outline_blank

An exceptional lacquer clearcoat which combines excellent application and polishing properties and a durable finish.

Preparation of Substrate:

Premium 1K Clearcoat can be applied over suitably prepared:

  • COBRA Basecoat and Dulon Basecoat after 20-30 minutes air flash at 25oC.
  • Suitably prepared original panels during blending.

Please note: Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for the intended use.

Application:

For complete panel or overall respray apply 3 - 4 full even coats. Air flash between coats. For part panel or spot repair, apply as for complete panel, extending each coat beyond the edge of the previous coat. Add up to a further 50% thinner to aid blending. Flash Off at 20oC 3 - 4 mins between coats at 20oC

Drying Times:
Air Dry @ 20oC. Dust Free: 10 - 15 minutes at 20oC. Compound: 6 hours at 20oC

Please Note: Drying times will need to be extended under cooler conditions. Seek further advice before spraying. 

5+
1K Textured Bumper Paint - Black | 1kg - Size 1kg 1kg ET900BBP-100
zoom_inchevron_leftchevron_right
1K Textured Bumper Paint - Black | 1kg - Size 1kg ETALON
$34.50
ET900BBP-100
check_box_outline_blank

1K textured paint for plastic parts of vehicles, especially for bumpers. Different texture can be achieved by adjusting air
pressure of spray gun and by varying the distance between spray gun and surface.

Colour: Black - mat (other colours available upon request)

Application properties
Suitable substrates: Suitable for plastic parts.

Application equipment: Conventional type spray gun
Nozzle diameter: 1,7 - 1,9mm
Air pressure: 3-4 bar

Dilution ratio: It can be diluted with cellulosic thinner till desired viscosity.


Wet paint properties
Density: 1,2 g/ml

Drying time: Dust dry: 10 minutes
Touch dry: 20 minutes
Ready to sand: 4 - 6 hours
Drying times may change depends on film thickness, ambient temperature and humidity

5+
2K CF Etch Primer Catalyst | 4 Litres - Size 4 Litres 4 Litres 980-31531/4L
zoom_inchevron_leftchevron_right
2K CF Etch Primer Catalyst | 4 Litres - Size 4 Litres PPG - COBRA
$187.32
980-31531/4L
check_box_outline_blank

A Chromate-free 2-pack etching primer. Its use will give maximum adhesion and corrosion resistance to correctly prepared metal surfaces under PPG 2K Primer.

Ideal use:
Mixing Ratio: 1:1.

Pot life: 4 hours at 25oC.

Application: 1-2 coats flash off time 25mins at 25c.

5+
2K CF Etch Primer | 4 Litres - Size 4 Litres 4 Litres 466-58266/4L
zoom_inchevron_leftchevron_right
2K CF Etch Primer | 4 Litres - Size 4 Litres PPG - COBRA
$285.03
466-58266/4L
check_box_outline_blank

A Chromate-free 2-pack etching primer. Its use will give maximum adhesion and corrosion resistance to correctly prepared metal surfaces under PPG 2K Primer.

Ideal use:
Mixing Ratio 1:1

Pot life 4 hours at 25oC.

Application: 1-2 coats flash off time 25mins at 25c.

5+
2K Cobra Thinner T010 - Fast | 1 Litre 1 Litre 920-T010/1L
zoom_inchevron_leftchevron_right
2K Cobra Thinner T010 - Fast | 1 Litre PPG - COBRA
$34.99
920-T010/1L
check_box_outline_blank

2K Cobra Thinner T010 Fast is a thinner suitable for use between 10 degrees and 20 degrees with all PPG Cobra and 2K Products. All thinning ratios are on the tins. 

5+
2K Cobra Thinner T010 - Fast | 20 Litres 20 Litres 920-T010/20L
zoom_inchevron_leftchevron_right
2K Cobra Thinner T010 - Fast | 20 Litres PPG - COBRA
$358.09
920-T010/20L
check_box_outline_blank

2K Cobra Thinner T010 Fast is a thinner suitable for use between 10 degrees and 20 degrees with all PPG Cobra and 2K Products. All thinning ratios are on the tins. 

5+
2K Cobra Thinner T010 - Fast | 4 Litres 4 Litres 920-T010/4L
zoom_inchevron_leftchevron_right
2K Cobra Thinner T010 - Fast | 4 Litres PPG - COBRA
$106.08
920-T010/4L
check_box_outline_blank

2K Cobra Thinner T010 Fast is a thinner suitable for use between 10 degrees and 20 degrees with all PPG Cobra and 2K Products. All thinning ratios are on the tins.

5+
2K Cobra Thinner T020 - Normal | 1 Litre 1 Litre 920-T020/1L
zoom_inchevron_leftchevron_right
2K Cobra Thinner T020 - Normal | 1 Litre PPG - COBRA
$27.50
920-T020/1L
check_box_outline_blank

2K Cobra Thinner T020 Normal is a thinner suitable for use between 20 degrees and 30 degrees with all PPG Cobra and 2K Products. All thinning ratios are on the tins.

5+
2K Cobra Thinner T020 - Normal | 20 Litres 20 Litres 920-T020/20L
zoom_inchevron_leftchevron_right
2K Cobra Thinner T020 - Normal | 20 Litres PPG - COBRA
$358.09
920-T020/20L
check_box_outline_blank

2K Cobra Thinner T020 Normal is a thinner suitable for use between 20 degrees and 30 degrees with all PPG Cobra and 2K Products. All thinning ratios are on the tins. 

5+
2K Cobra Thinner T020 - Normal | 4 Litres 4 Litres 920-T020/4L
zoom_inchevron_leftchevron_right
2K Cobra Thinner T020 - Normal | 4 Litres PPG - COBRA
$106.08
920-T020/4L
check_box_outline_blank

2K Cobra Thinner T020 Normal is a thinner suitable for use between 20 degrees and 30 degrees with all PPG Cobra and 2K Products. All thinning ratios are on the tins.

5+
2K Colour Mixed | 1 Litre 1 Litre 2KMC1L
zoom_inchevron_leftchevron_right
2K Colour Mixed | 1 Litre PPG
$129.23
2KMC1L
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.  

5+
2K Colour Mixed | 2 Litres 2 Litres 2KMC2L
zoom_inchevron_leftchevron_right
2K Colour Mixed | 2 Litres PPG
$244.43
2KMC2L
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.  

5+
2K Colour Mixed | 250mL 250mL 2KMC250
zoom_inchevron_leftchevron_right
2K Colour Mixed | 250mL PPG
$46.00
2KMC250
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.   

5+
2K Colour Mixed | 3 Litres 3 Litres 2KMC3L
zoom_inchevron_leftchevron_right
2K Colour Mixed | 3 Litres PPG
$355.68
2KMC3L
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.  

5+
2K Colour Mixed | 4 Litres 4 Litres 2KMC4L
zoom_inchevron_leftchevron_right
2K Colour Mixed | 4 Litres PPG
$469.76
2KMC4L
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.  

5+
2K Colour Mixed | 500mL 500mL 2KMC500
zoom_inchevron_leftchevron_right
2K Colour Mixed | 500mL PPG
$86.11
2KMC500
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability. 

5+
2K Epoxy Primer 3:1 Kit | 1 Litre - Size 1 Litre 1 Litre ET5400KIT
zoom_inchevron_leftchevron_right
2K Epoxy Primer 3:1 Kit | 1 Litre - Size 1 Litre ETALON
$70.73
ET5400KIT
check_box_outline_blank

Chromate free versatile epoxy primer with anticorrosive protection for automotive, marine and industrial usage. Can be used as an undercoat or as a final coating. Suitable as an adhesion promoter on metal, steel, aluminium, fiberglass. Applicable on surfaces that will be submerged in water. Easy application with roll, airless gun, electrostatic gun, with HVLP or conventional spraying equipment.

1 Litre Kit:

  • 750mL Primer, grey (ET5400EP-A075)
  • 250mL Hardener, grey (ET5400EH-B025)
5+
2K Ice White | 4 Litres - Size 4 Litres 4 Litres 426-44413/4L
zoom_inchevron_leftchevron_right
2K Ice White | 4 Litres - Size 4 Litres PPG - COBRA
$387.93
426-44413/4L
check_box_outline_blank

A high quality two-pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.

2K Ice White can be applied over:

  • Sound existing paint finishes which have been degreased with Prepsol and sanded with P400 dry or P600 wet.
  • 2K Primer Fillers/Sealers (467 Line) and 2K HS Tintable Wet Primer (P565-358).
  • Premium 1K Primer Filler when used for small spot repairs.

Do not apply 2K Solid Colour directly over etch primers.

Mixing By Volume: 2K Ice White Colour 2 vols; Hardener 1 vol; Thinner 10-20% vol

PRODUCT AND ADDITIVES:
Product: 2K Ice White Colour

Hardeners: 2K/Cobra Slow Hardener 980-H030, 2K/Cobra Normal Hardener 980-H020, 2K/Cobra Normal Hardener 980-H010

Thinners: 2K/Cobra Slow Thinner 920-T030, 2K/Cobra Normal Thinner 920-T020,2K/Cobra Fast 920-T010 ,  Thinner Anti-Silicone Reducer 920-43054

POT LIFE:
Catalysed material is useable up to 4 hours at 25oC.

APPLICATION:
2-3 medium, wet, even coats.

FLASH OFF:
3-5 minutes between coats at 25oC.

DRYING TIMES:
Air Dry: Handle able 12 hours at 25oC; Polishing 24 hours at 25oC
Bake: 40 minutes at 65oC 

5+
2K Imagesider Clearcoat | 4 Litres 455-48207/4L
zoom_inchevron_leftchevron_right
2K Imagesider Clearcoat | 4 Litres PPG
$287.09
455-48207/4L
check_box_outline_blank

2K Imagesider Clearcoat is highly flexible and has been formulated for use over graphic imaged PVC curtains. The imaged curtains are clear coated directly without any form of preparation as they are delivered to the applicator in pristine condition. The applicator must be careful not to contaminate the imaged PVC surface before applying the clearcoat.

It should be noted that the raw clearcoat component itself is slightly cloudy due to the presence of a flow agent. This has been added to get good wet-out of clearcoat over both the background lacquer on the PVC and the ink. This cloudiness disappears when the clearcoat is activated and thinned.

The performance of 2K Imagesider Clearcoat is determined by the quality of both the PVC and the inks used for the imaging. As PPG does not have any control over either of these, PPG does not offer any warranty for the coating of PVC curtain sides.

This Clearcoat should be mixed with Hardener 980-H020 Normal at a rate of 2 parts clearcoat : 1 part hardener. Thinner is required 920-T020 Normal at a rate of 10-20%. Full mixing rate is 2;1;10-20% 

5+
2K Jet Black | 1 Litre 1 Litre 426-00070/1L
zoom_inchevron_leftchevron_right
2K Jet Black | 1 Litre PPG - COBRA
$101.87
426-00070/1L
check_box_outline_blank

A high quality two-pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.

2K Jet Black can be applied over:

  • Sound existing paint finishes which have been degreased with Prepsol and sanded with P400 dry or P600 wet.
  • 2K Primer Fillers/Sealers (467 Line) and 2K HS Tintable Wet Primer (P565-358).
  • Premium 1K Primer Filler when used for small spot repairs.

Do not apply 2K Solid Colour directly over etch primers.

Mixing By Volume: 2K Jet Black Colour 2 vols; Hardener 1 vol; Thinner 10-20% vol.

PRODUCT AND ADDITIVES

Product: 2K Jet Black Colour

Hardeners: 2K/Cobra Slow Hardener 980-H030, 2K/Cobra Normal Hardener 980-H020, 2K/Cobra Normal Hardener 980-H010,

Thinners: 2K/Cobra Slow Thinner 920-T030, 2K/Cobra Normal Thinner 920-T020,2K/Cobra Fast 920-T010 ,  Thinner Anti-Silicone Reducer 920-43054

POT LIFE:
Catalysed material is useable up to 4 hours at 25 oC.

APPLICATION:
2-3 medium, wet, even coats

FLASH OFF:
3-5 minutes between coats at 25oC

DRYING TIME:
Air Dry: Handle able 12 hours at 25oC Polishing 24 hours at 25oC
Bake: 40 minutes at 65oC 

 

5+
2K Jet Black | 4 Litres 4 Litres 426-00070/4L
zoom_inchevron_leftchevron_right
2K Jet Black | 4 Litres PPG - COBRA
$387.93
426-00070/4L
check_box_outline_blank

A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.

2K Jet Black can be applied over:

  • Sound existing paint finishes which have been degreased with Prepsol and sanded with P400 dry or P600 wet.
  • 2K Primer Fillers/Sealers (467 Line) and 2K HS Tintable Wet Primer (P565-358).
  • Premium 1K Primer Filler when used for small spot repairs.

Do not apply 2K Solid Colour directly over etch primers.

Mixing By Volume: 2K Jet Black Colour 2 vols; Hardener 1 vol; Thinner 10-20% vol

Product and Additives

Product: 2K Jet Black Colour

Hardeners: 2K/Cobra Slow Hardener 980-H030, 2K/Cobra Normal Hardener 980-H020, 2K/Cobra Normal Hardener 980-H010,

Thinners: 2K/Cobra Slow Thinner 920-T030, 2K/Cobra Normal Thinner 920-T020,2K/Cobra Fast 920-T010 ,  Thinner Anti-Silicone Reducer 920-43054

POT LIFE:
Catalysed material is useable up to 4 hours at 25 oC.

APPLICATION:
2-3 medium, wet, even coats

FLASH OFF:
3 - 5 minutes between coats at 25oC

DRYING TIME:
Air Dry: Handle able 12 hours at 25oC Polishing 24 hours at 25oC
Bake: 40 minutes at 65oC 


5+